TAGGED: 3D Printing, installation, parameter
-
-
March 22, 2023 at 10:22 am
mian imran
SubscriberHello sir: I am using Ansys Am module and as you know that in the selective laser melting process laser power is a crucial factor but unfortunately I cannot get that factor in Ansys 2022 Am module. In Ansys 2022, there are 3 factors i.e. hatch spacing, laser speed, and deposition thickness available. So please guide me how can I get that laser power factor along with hatch spacing, deposition thickness, and laser speed: -
March 23, 2023 at 6:42 am
Subashni Ravichandran
Forum ModeratorHello mian imran
I apologize but I'm not sure I understand which Ansys product you are using.
Are you using Ansys Discovery AIM?
-
March 23, 2023 at 10:12 am
mian imran
SubscriberSubashni i am using Ansys 2022 and there is a Module having name AM structure..
-
-
March 24, 2023 at 1:57 am
Subashni Ravichandran
Forum ModeratorHello mian imran
For queries on Ansys Workbench, please raise them on Ansys Customer Portal
-
- You must be logged in to reply to this topic.

Boost Ansys Fluent Simulations with AWS
Computational Fluid Dynamics (CFD) helps engineers design products in which the flow of fluid components is a significant challenge. These different use cases often require large complex models to solve on a traditional workstation. Click here to join this event to learn how to leverage Ansys Fluids on the cloud, thanks to Ansys Gateway powered by AWS.

Earth Rescue – An Ansys Online Series
The climate crisis is here. But so is the human ingenuity to fight it. Earth Rescue reveals what visionary companies are doing today to engineer radical new ideas in the fight against climate change. Click here to watch the first episode.

Ansys Blog
Subscribe to the Ansys Blog to get great new content about the power of simulation delivered right to your email on a weekly basis. With content from Ansys experts, partners and customers you will learn about product development advances, thought leadership and trends and tips to better use Ansys tools. Sign up here.
- How to work with STL file?
- Rotate tool in ANSYS Design Modeler
- section plane
- Using Symmetry in DesignModeler and Expanding the Results
- ANSYS FLUENT – Operation would result in non manifold bodies
- drawing a geometry by importing a table of points
- material properties
- Coordinates orientation
- “contact pair has no element in it.” how to resolve this problem
- Parameters not imported into Workbench 18.2 from Solidworks/Inventor
-
7584
-
4434
-
2951
-
1422
-
1322
© 2023 Copyright ANSYS, Inc. All rights reserved.