July 11, 2019 at 8:44 pmstiwari_slcSubscriber
I have never used ANSYS before and I would like to conduct some simulation studies with Additive Manufacturing module. Would you please direct me to some tutorials/resources that would help me to get started on this topic with ANSYS.
Any help would be appreciated.
July 11, 2019 at 8:57 pmpeteroznewmanSubscriber
Additive Manufacturing is not included in the free Student License for ANSYS. Are you on a full license with the addition of the Additive Manufacturing license?
July 11, 2019 at 9:18 pmpeteroznewmanSubscriber
Run Client ANSLIC_ADMIN Utility.
Click on the View Status/Diagnostic Options > Display License Status.
The window will fill with all the modules that are licensed.
I don't know what the license name is for Additive Manufacturing since I don't have that license, but it may be obvious.
July 11, 2019 at 9:36 pmstiwari_slcSubscriber
Thanks, we have the AM module. Any help with the AM tutorials/resources would be appreciated.
July 11, 2019 at 10:46 pmSandeep MedikondaAnsys Employee
Please refer to the help. Especially:
The student community is designed to help students and academia.
Please reach out to ANSYS technical support via the customer portal if you/your organization is a customer.
- You must be logged in to reply to this topic.
Boost Ansys Fluent Simulations with AWS
Computational Fluid Dynamics (CFD) helps engineers design products in which the flow of fluid components is a significant challenge. These different use cases often require large complex models to solve on a traditional workstation. Click here to join this event to learn how to leverage Ansys Fluids on the cloud, thanks to Ansys Gateway powered by AWS.
Earth Rescue – An Ansys Online Series
The climate crisis is here. But so is the human ingenuity to fight it. Earth Rescue reveals what visionary companies are doing today to engineer radical new ideas in the fight against climate change. Click here to watch the first episode.
Subscribe to the Ansys Blog to get great new content about the power of simulation delivered right to your email on a weekly basis. With content from Ansys experts, partners and customers you will learn about product development advances, thought leadership and trends and tips to better use Ansys tools. Sign up here.
- Saving & sharing of Working project files in .wbpz format
- Solver Pivot Warning in Beam Element Model
- Understanding Force Convergence Solution Output
- An Unknown error occurred during solution. Check the Solver Output…..
- What is the difference between bonded contact region and fixed joint
- whether have the difference between using contact and target bodies
- The solver engine was unable to converge on a solution for the nonlinear problem as constrained.
- User manual
- Colors and Mesh Display
- material damping and modal analysis
© 2023 Copyright ANSYS, Inc. All rights reserved.