June 19, 2019 at 1:20 pmjt2016Subscriber
I was doing my project and I right mouse button clicked and held the click to make a box in my graphics window in ANSYS 15.0 Mechanical APDL and after releasing the mouse click, it caused my plot of lines to disappear.
I checked to make sure I didn't delete my lines by listing them, and they are all still listed.
However when I do plot->lines, nothing happens. I also tried plotting my keypoints and nothing happens
Here are snips after I try plotting lines or keypoints
Thank you for your help.
June 20, 2019 at 7:40 pmpeteroznewmanSubscriber
1) Can you upgrade to the current version of ANSYS? Version 15 is at least 5 years old.
2) Try upgrading your graphics card driver.
June 21, 2019 at 12:52 amjt2016Subscriber
Thank you Mr. Newman for the response. I cannot upgrade because we need to use version 15 for our school project.
What I did was I just exited out of ANSYS and reopened the file, and then the plots were showing again.
Thank you again for your time.
- You must be logged in to reply to this topic.
Boost Ansys Fluent Simulations with AWS
Computational Fluid Dynamics (CFD) helps engineers design products in which the flow of fluid components is a significant challenge. These different use cases often require large complex models to solve on a traditional workstation. Click here to join this event to learn how to leverage Ansys Fluids on the cloud, thanks to Ansys Gateway powered by AWS.
Earth Rescue – An Ansys Online Series
The climate crisis is here. But so is the human ingenuity to fight it. Earth Rescue reveals what visionary companies are doing today to engineer radical new ideas in the fight against climate change. Click here to watch the first episode.
Subscribe to the Ansys Blog to get great new content about the power of simulation delivered right to your email on a weekly basis. With content from Ansys experts, partners and customers you will learn about product development advances, thought leadership and trends and tips to better use Ansys tools. Sign up here.
- How to work with STL file?
- Rotate tool in ANSYS Design Modeler
- Using Symmetry in DesignModeler and Expanding the Results
- section plane
- material properties
- ANSYS FLUENT – Operation would result in non manifold bodies
- drawing a geometry by importing a table of points
- Geometry scaling
- Parameters not imported into Workbench 18.2 from Solidworks/Inventor
- Coordinates orientation
© 2023 Copyright ANSYS, Inc. All rights reserved.