TAGGED: Discovery AIM
-
-
March 24, 2021 at 7:49 am
Manasa
SubscriberNeed your support to help solve the problem with Ansys Live/Aim.
No error is being generated only subscription not available even with free license.
Kindly Support.
Thanks & Regards
Manasa M
-
March 24, 2021 at 9:31 am
Charudatta Bandgar
Forum ModeratorHello manasa. m
I checked in our system, and no license is assigned to your mail. Please go to https://discoveryforum.ansys.com/t/m1hzp07 and click on the link saying 'If you need a trial license, please request one here' as shown in the image below, let me know if you face any issues with that. Also, go through the Installation and licensing FAQs.
Regards.
-
March 24, 2021 at 10:19 am
Charudatta Bandgar
Forum ModeratorApologies for misunderstanding manasa. m . I just saw your email and the customer email was different from what I had checked earlier. I would suggest you activate the license manually through the command line as explained here, and let me know if it solves your issue.
Regards.
-
- You must be logged in to reply to this topic.

Boost Ansys Fluent Simulations with AWS
Computational Fluid Dynamics (CFD) helps engineers design products in which the flow of fluid components is a significant challenge. These different use cases often require large complex models to solve on a traditional workstation. Click here to join this event to learn how to leverage Ansys Fluids on the cloud, thanks to Ansys Gateway powered by AWS.

Earth Rescue – An Ansys Online Series
The climate crisis is here. But so is the human ingenuity to fight it. Earth Rescue reveals what visionary companies are doing today to engineer radical new ideas in the fight against climate change. Click here to watch the first episode.

Ansys Blog
Subscribe to the Ansys Blog to get great new content about the power of simulation delivered right to your email on a weekly basis. With content from Ansys experts, partners and customers you will learn about product development advances, thought leadership and trends and tips to better use Ansys tools. Sign up here.
- How to work with STL file?
- Rotate tool in ANSYS Design Modeler
- section plane
- Using Symmetry in DesignModeler and Expanding the Results
- ANSYS FLUENT – Operation would result in non manifold bodies
- drawing a geometry by importing a table of points
- material properties
- Coordinates orientation
- “contact pair has no element in it.” how to resolve this problem
- Parameters not imported into Workbench 18.2 from Solidworks/Inventor
-
8798
-
4658
-
3151
-
1680
-
1470
© 2023 Copyright ANSYS, Inc. All rights reserved.