-
-
September 14, 2017 at 12:43 pm
sumedhjain
Subscriber1.I am running large cases (10GB size) with polyhedron cells (45M). I often have problems while opening the case files,
Usually it gets stuck on 'building mesh' process.
2. During transient simulations, after writing large data files (15GB) for every 100 timesteps data file write process freezes or never completes, I have to kill the job and run it again.
PS: I run my jobs on multiple nodes (5 of them) each with 20 Xeon cores and 128 GB RAM , I dont think its a memory issue
Help is much appreciated
-
- You must be logged in to reply to this topic.

Earth Rescue – An Ansys Online Series
The climate crisis is here. But so is the human ingenuity to fight it. Earth Rescue reveals what visionary companies are doing today to engineer radical new ideas in the fight against climate change. Click here to watch the first episode.

Ansys Blog
Subscribe to the Ansys Blog to get great new content about the power of simulation delivered right to your email on a weekly basis. With content from Ansys experts, partners and customers you will learn about product development advances, thought leadership and trends and tips to better use Ansys tools. Sign up here.
- Suppress Fluent to open with GUI while performing in journal file
- Floating point exception in Fluent
- What are the differences between CFX and Fluent?
- Heat transfer coefficient
- Getting graph and tabular data from result in workbench mechanical
- The solver failed with a non-zero exit code of : 2
- Difference between K-epsilon and K-omega Turbulence Model
- Time Step Size and Courant Number
- Mesh Interfaces in ANSYS FLUENT
- error in cfd post
-
2656
-
2120
-
1347
-
1118
-
461
© 2023 Copyright ANSYS, Inc. All rights reserved.