TAGGED: ansys-fluent, hpc, licensing, mesh-generation, workbench
February 5, 2021 at 2:18 amjjacobSubscriberI'm using Ansys 19.2 with a research license on a Virtual Machine through Nutanix with AWS using the framenPro 122GBng3.4xlargenRAM:122 GBnCPU Vcores:16n1 GPU (tesla M60- enabled with quadro drivers)n with a pass through GPU yet when I do any sort of mesh in the workbench or in fluent it never uses the gpu. Is there a way to force Ansys to use the GPU? Also I have tried going to Tools>Solve process settings but there is no option for solve process settings I'm doing highly refined meshed with 10 mill plus nodes and it takes copious amount of time so utalizing the GPU would be helpful.Thanks n
February 5, 2021 at 9:57 amRobAnsys EmployeeNot all of the codes use gpu for all models/functions. Fluent Meshing doesn't use gpu, and at R19.2 gpu support is fairly limited in the solver. n
- You must be logged in to reply to this topic.
Boost Ansys Fluent Simulations with AWS
Computational Fluid Dynamics (CFD) helps engineers design products in which the flow of fluid components is a significant challenge. These different use cases often require large complex models to solve on a traditional workstation. Click here to join this event to learn how to leverage Ansys Fluids on the cloud, thanks to Ansys Gateway powered by AWS.
Earth Rescue – An Ansys Online Series
The climate crisis is here. But so is the human ingenuity to fight it. Earth Rescue reveals what visionary companies are doing today to engineer radical new ideas in the fight against climate change. Click here to watch the first episode.
Subscribe to the Ansys Blog to get great new content about the power of simulation delivered right to your email on a weekly basis. With content from Ansys experts, partners and customers you will learn about product development advances, thought leadership and trends and tips to better use Ansys tools. Sign up here.
- License Error
- Error with workbench SceneGraphChart
- How can I renew ANSYS student version license?
- Workbench not opening
- Sizing on Ansys Workbench 19.2
- Workbench error
- Error: Exception of type ‘Ansys.Fluent.Cortex.Cortex not availableException’ was thrown
- Ansys2021R2 ansys212 seg faults immediately on RHEL8.2
- Licensing error while opening ANSYS Mechanical
- An error occurred when the post processor attempted to load a specific result.
© 2023 Copyright ANSYS, Inc. All rights reserved.