3D Design

3D Design

Ansys Workbench DE and modal

    • xiao
      Subscriber

      Hi all,


      Recently I faced a problem that makes me confused.


      In Ansys workbench, design modeler, I build a model. I use "pattern" to copy this model and move in the x-direction by 200 meters. In DE, I checked the coordinates; it is correct (in figure 1-4).


      But when I in the modal section, the coordinate is wrong, as shown in figure 5-8. I don't know what happened to the process. 


      Can anyone help me deal with the problem?


      figure1-4


      figure1figure2figure3figure4


      Below is figure 5-8 in modal section


      figure5figure6figure7figure8

    • xiao
      Subscriber

      As in the DE, the coordinate is (198.5-1.5,0) and (201.5, -1.5,0). But in the modal, it is (198-1.5,0) and (202, -1.5,0).

Viewing 1 reply thread
  • You must be logged in to reply to this topic.