TAGGED: Ansys Discovery
March 30, 2022 at 7:34 amRobertoSubscriber
is it possible to have a guide on the beta features of Discovery? There is online help for the bet commands
March 30, 2022 at 8:00 amCharudatta BandgarForum Moderator
Are you looking for this?
March 31, 2022 at 8:46 amRobertoSubscriber
Hello Charudatta Bandgar
I tried Subdivision mode Surface Tools could it be added on SpaceClaim too? Second it would be more convenient to place it inside SpaceClaim which is the main modeling environment.
A very interesting mode for surfaces
March 31, 2022 at 9:18 amCharudatta BandgarForum Moderator
Roberto I will have ask the developers if there is any plan like that. Will let you know.
April 1, 2022 at 7:03 amCharudatta BandgarForum Moderator
This will not be added to SpaceClaim, you can use it in Discovery beta feature always.
April 1, 2022 at 7:06 amRobertoSubscriber
Charudatta Bandgar Too bad, in my opinion it is easier to use it in the SpaceClaim environment.
Thanks for updating me, I will be using it in Discovery
- You must be logged in to reply to this topic.
Boost Ansys Fluent Simulations with AWS
Computational Fluid Dynamics (CFD) helps engineers design products in which the flow of fluid components is a significant challenge. These different use cases often require large complex models to solve on a traditional workstation. Click here to join this event to learn how to leverage Ansys Fluids on the cloud, thanks to Ansys Gateway powered by AWS.
Earth Rescue – An Ansys Online Series
The climate crisis is here. But so is the human ingenuity to fight it. Earth Rescue reveals what visionary companies are doing today to engineer radical new ideas in the fight against climate change. Click here to watch the first episode.
Subscribe to the Ansys Blog to get great new content about the power of simulation delivered right to your email on a weekly basis. With content from Ansys experts, partners and customers you will learn about product development advances, thought leadership and trends and tips to better use Ansys tools. Sign up here.
- How to work with STL file?
- Rotate tool in ANSYS Design Modeler
- section plane
- Using Symmetry in DesignModeler and Expanding the Results
- ANSYS FLUENT – Operation would result in non manifold bodies
- drawing a geometry by importing a table of points
- material properties
- Coordinates orientation
- “contact pair has no element in it.” how to resolve this problem
- Parameters not imported into Workbench 18.2 from Solidworks/Inventor
© 2023 Copyright ANSYS, Inc. All rights reserved.