August 18, 2023 at 3:45 pmBALASubscriber
how to apply bolt pretension when the bolt is having thread part all over means there is no shank part without thread, as preload can be given to the part where there is frictional contact and for threaded part we do give bonded contact. When the bolt is like there is whole shank surface having thread part then how to decide which part to considered for preload?
For reference image is shown below
August 19, 2023 at 7:45 pmpeteroznewmanSubscriber
Read this discussion and come back with any questions.
August 23, 2023 at 5:30 amBALASubscriber
Thank you very much for sharing valueable information sir.
As i want to apply pretension which i think is not possible when we consider a bonded contact, so from the shared discussion i can use frictional contact with geomtery correction thread option and can apply a pretension, am i correct?
August 23, 2023 at 7:01 amMd_SalemSubscriber
Hi @ Gecem,
excuseme for interruption but I think something wrong with my acount it is not responding for new post command,
I am asking about different topic !!
how I can extract the mode shape vectors for modal analysis ?
- You must be logged in to reply to this topic.
Boost Ansys Fluent Simulations with AWS
Computational Fluid Dynamics (CFD) helps engineers design products in which the flow of fluid components is a significant challenge. These different use cases often require large complex models to solve on a traditional workstation. Click here to join this event to learn how to leverage Ansys Fluids on the cloud, thanks to Ansys Gateway powered by AWS.
Earth Rescue – An Ansys Online Series
The climate crisis is here. But so is the human ingenuity to fight it. Earth Rescue reveals what visionary companies are doing today to engineer radical new ideas in the fight against climate change. Click here to watch the first episode.
Subscribe to the Ansys Blog to get great new content about the power of simulation delivered right to your email on a weekly basis. With content from Ansys experts, partners and customers you will learn about product development advances, thought leadership and trends and tips to better use Ansys tools. Sign up here.
- Solver Pivot Warning in Beam Element Model
- Saving & sharing of Working project files in .wbpz format
- Understanding Force Convergence Solution Output
- User manual
- An Unknown error occurred during solution. Check the Solver Output…..
- What is the difference between bonded contact region and fixed joint
- The solver engine was unable to converge on a solution for the nonlinear problem as constrained.
- whether have the difference between using contact and target bodies
- Defining rigid body and contact
- Colors and Mesh Display
© 2023 Copyright ANSYS, Inc. All rights reserved.