Discovery Import

Discovery Import

Cannot start SpaceClaim

    • sam
      Subscriber

      Cannot start SpaceClaim all of a sudden.

      When I run the main program, it sits on the splash screen for ages, then pops up a login screen. Logging in with my account details, it then hangs for a while then shows these messages.

      It worked fine the other day, just seemingly stopped working.

       


    • Devendra Badgujar
      Ansys Employee

      Hello Sam Whitney

      Can you please go through the Troubleshooting document, especially the point 5A and let me know if it helps.

      Regards.

    • sam
      Subscriber

      Hi Devendra,

      Ping is fine, I think Ansys have setup my license incorrectly.

      I started SpaceClaim in View Only mode and it said my support contract had expired, it's about a year since I purchased a perpetual license.

      So it looks like they mistakenly set that up as 12 months and it has now (a little ungracefully...) expired and not allowing SpaceClaim to start. Leaving me a bit stuffed at the moment.

       

      Pinging sc-fnoweb.flexnetoperations.com [64.14.29.39] with 32 bytes of data:
      Reply from 64.14.29.39: bytes=32 time=160ms TTL=128
      Reply from 64.14.29.39: bytes=32 time=148ms TTL=128
      Reply from 64.14.29.39: bytes=32 time=148ms TTL=128
      Reply from 64.14.29.39: bytes=32 time=148ms TTL=128

      Ping statistics for 64.14.29.39:
          Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
      Approximate round trip times in milli-seconds:
          Minimum = 148ms, Maximum = 160ms, Average = 151ms

    • sam
      Subscriber

      It's starting up now, I am guessing the email I sent to the UK office got it sorted. Thanks for replying :-)

    • sam
      Subscriber

      It's gone back to not starting up again, so at present, I cannot use SpaceClaim...

Viewing 4 reply threads
  • You must be logged in to reply to this topic.