February 13, 2018 at 8:59 pmRaef.KobeissiSubscriber
September 5, 2018 at 2:17 pmcehangirSubscriber
Do you have a tutorial/ demo for the EDC ?
September 13, 2018 at 7:03 pm
September 17, 2018 at 12:58 pmshaimaa zohairSubscriber
i am new in ansys and i use ansys fluent to simulate open channel flow the atmospheric surface was pressure outlet but it have flow rate value when the outlet flow rate equal zero , some times it tell me interior error no edge at 927 zero zone.
when i use cfx it tell me that it cant find code 1 .
August 14, 2019 at 2:53 ammochzeenSubscriber
Thanks so much for this tutorial! Just two niggling questions, 1) What is the difference between non-premixed combustion vs species transport options? Because it seems that both perform combustion reaction too. This came about from question number 2) If I chose non-premixed combustion, there is no option to specify species at inlets during Boundary Condition, only mixture fraction is available. But if I chose Species Transport, I can specify species at inlets.
So, is there any difference if I choose either of them? Thank you.
July 20, 2020 at 3:14 pmchaymaSubscriber
can you send me this tutorial please?
July 27, 2020 at 1:23 ampunyaswarup2000Subscriber
- You must be logged in to reply to this topic.
Boost Ansys Fluent Simulations with AWS
Computational Fluid Dynamics (CFD) helps engineers design products in which the flow of fluid components is a significant challenge. These different use cases often require large complex models to solve on a traditional workstation. Click here to join this event to learn how to leverage Ansys Fluids on the cloud, thanks to Ansys Gateway powered by AWS.
Earth Rescue – An Ansys Online Series
The climate crisis is here. But so is the human ingenuity to fight it. Earth Rescue reveals what visionary companies are doing today to engineer radical new ideas in the fight against climate change. Click here to watch the first episode.
Subscribe to the Ansys Blog to get great new content about the power of simulation delivered right to your email on a weekly basis. With content from Ansys experts, partners and customers you will learn about product development advances, thought leadership and trends and tips to better use Ansys tools. Sign up here.
- Suppress Fluent to open with GUI while performing in journal file
- Floating point exception in Fluent
- What are the differences between CFX and Fluent?
- Heat transfer coefficient
- Getting graph and tabular data from result in workbench mechanical
- Difference between K-epsilon and K-omega Turbulence Model
- The solver failed with a non-zero exit code of : 2
- Time Step Size and Courant Number
- Mesh Interfaces in ANSYS FLUENT
- error: Received signal SIGSEGV
© 2023 Copyright ANSYS, Inc. All rights reserved.