-
-
November 9, 2019 at 8:06 pm
enesc1
Subscriberhello,
i am a student of automotive eng. and i want to make a heat transfer and exchange analysis with cfd fluent but i cant assign wall boundary to the contact regions so the heat transfer is 0. how can i fix this situation? and is there another method to make radiator analysis?
-
November 22, 2019 at 1:46 pm
Rob
Ansys EmployeeIf you create a conformal mesh it'll help. But you may also need to make the radiator bit solid. As you've not really explained what you're trying to show it's not easy to answer.
-
November 25, 2019 at 10:01 am
nagthermal
SubscriberHello sir,
I want to impose mixed boundary condition on wall boundary in FLUENT.
the data is HTC, outside temperature, emissivity only but FLUENT asks external radiation temperature also.
my doubt is what is the difference between free stream and external radiation temperature? could you please help me
-
December 7, 2019 at 7:44 pm
-
- You must be logged in to reply to this topic.

Simulation World 2022
Check out more than 70 different sessions now available on demand. Get inspired as you hear from visionary companies, leading researchers and educators from around the globe on a variety of topics from life-saving improvements in healthcare, to bold new realities of space travel. Take a leap of certainty and check out a session today here.

Earth Rescue – An Ansys Online Series
The climate crisis is here. But so is the human ingenuity to fight it. Earth Rescue reveals what visionary companies are doing today to engineer radical new ideas in the fight against climate change. Click here to watch the first episode.

Ansys Blog
Subscribe to the Ansys Blog to get great new content about the power of simulation delivered right to your email on a weekly basis. With content from Ansys experts, partners and customers you will learn about product development advances, thought leadership and trends and tips to better use Ansys tools. Sign up here.
- Limitations of ANSYS Student
- Off setting lines onto surfaces
- Free ANSYS Research software for Student Competition Teams
- Meshing Problem in Explicit Dynamic-Roll Cage
- When DesignModeler is a better choice than SpaceClaim
- Rosette direction issue due to Geometry limits
- Applying Moments for the Revolute Joints in Explicit Dynamics
- Ansys Composite prepost analysis
- workbench
- Composite Material choice in ACP
-
613
-
562
-
220
-
188
-
128
© 2022 Copyright ANSYS, Inc. All rights reserved.