Changing of font size

- January 24, 2019 at 5:59 am
  
  mstricks
  Subscriber
  
  hi
  
  I am using a 32 inch screen for ANSYS Workbench but the font size is is very small. Can any guide me how to increase font size in ANSYS Workbench.
  
  The software version is 19.2
- January 25, 2019 at 2:39 pm
  
  Rob
  Forum Moderator
  
  Are you using a 4k screen/graphics? ANSYS isn't set for that resolution (yet) which can make reading the icons a little difficult.
- January 25, 2019 at 4:44 pm
  
  mstricks
  Subscriber
  
  Yes sir it is a 4k screen
- January 31, 2019 at 10:25 am
  
  Rob
  Forum Moderator
  
  OK, unfortunately we don't have 4k compatibility at the moment so you may need to adjust the screen resolution.
- April 20, 2020 at 7:05 pm
  
  AK800
  Subscriber
  
  From start you could right click on Ansys Workbench then open file location. right click again of ansys workbench and go down to properties
  
  click on compatibility then go to Change high DPI settings
  
  check program DPI, check the override scaling too and change it to System Enhanced. you also better use the DPI to be displayed when you use the program
  
  you should then restart your pc. I am sure this should solve the problem, I encountered the same issue with my 4k screen and it is now resolved.
  
  you might also have to do the same procedure on Fluent, CFD post,,,,,etc
  
  I hope this helps
  
  Regards
  
  Aaron
- May 27, 2022 at 2:38 pm
  
  ansysnik
  Subscriber
  
  .
  A lot of thanks for the instructions.
  I have ansys 2019R2. The font size was succesfully ibcreased for Fluent, SpaceClaim and Work Bench 2019R2.
  However when I try to oen from workbench meshing tool ANSYSWB.exe, the size of the menu fonts there could not be changed by using the same recipe
  Does anyone know different cure?
  
  .
- May 27, 2022 at 2:44 pm
  
  ansysnik
  Subscriber
  
  .
  Sorry for the typos
  ibcreased =>increased
  oen=>open
  .
- February 26, 2023 at 2:10 am
  
  Ivan Kmecko
  Subscriber
  
  It is 2023 now, four years have past since you become aware of the problem, did you fix the problem?

Viewing 7 reply threads

You must be logged in to reply to this topic.

Ansys Innovation Space

SimACE-23

Boost Ansys Fluent Simulations with AWS

Computational Fluid Dynamics (CFD) helps engineers design products in which the flow of fluid components is a significant challenge. These different use cases often require large complex models to solve on a traditional workstation. Click here to join this event to learn how to leverage Ansys Fluids on the cloud, thanks to Ansys Gateway powered by AWS.

Earth Rescue – An Ansys Online Series

The climate crisis is here. But so is the human ingenuity to fight it. Earth Rescue reveals what visionary companies are doing today to engineer radical new ideas in the fight against climate change. Click here to watch the first episode.

Ansys Blog

Subscribe to the Ansys Blog to get great new content about the power of simulation delivered right to your email on a weekly basis. With content from Ansys experts, partners and customers you will learn about product development advances, thought leadership and trends and tips to better use Ansys tools. Sign up here.

Trending discussions