February 9, 2018 at 7:28 amsbakintundeSubscriber
Hi everyone, in my course of simulating a ci engine I discovered that I needed 4 profile files and just managed to get one. I need
1 the geometry file,
2 the injection profile file
3 the chemical rxn profile
4 the thermal xchange profile file.
Please anyone with these should help me out. Thank you in anticipation.
February 9, 2018 at 12:53 pmpeteroznewmanSubscriber
September 18, 2022 at 5:21 pmSajit AhamedSubscriber
@peteroznewman do you have the profile file? please help me if you have the file.
September 18, 2022 at 5:20 pmSajit AhamedSubscriber
September 18, 2022 at 5:23 pmSajit AhamedSubscriberdo you have the profile file? please help me if you have the file.
- You must be logged in to reply to this topic.
Simulation World 2022
Earth Rescue – An Ansys Online Series
- Suppress Fluent to open with GUI while performing in journal file
- Heat transfer coefficient
- What are the differences between CFX and Fluent?
- Floating point exception in Fluent
- Time Step Size and Courant Number
- Difference between K-epsilon and K-omega Turbulence Model
- The solver failed with a non-zero exit code of : 2
- Floating point exception
- Exporting Data Results