3D Design

3D Design

Creation of line body in z-direction

    • Naief

      I would like to drow a line in z direction, and then i want to assign it with ( I crosssection).

      Problem is , the I cross section is automatically created in xy-plane. 

      To drow a line in z direction seems to be inpossible. 

      how it works?

    • peteroznewman

      In 3D, a line body can point in any direction and even be curved.

      The cross-section is always perpendicular to the line body at every point along the line.

      The cross-section is drawn on an XY coordinate system independent from the 3D line body.

Viewing 1 reply thread
  • You must be logged in to reply to this topic.