July 14, 2019 at 3:01 pmanantSubscriber
During meshing my cursor is tracking it's path when I move it around. Please help me in this regard.
July 14, 2019 at 4:29 pmpeteroznewmanSubscriber
ANSYS products are tested with a list of graphics cards and any defects are fixed before releasing the product. These cards are marketed to engineering professionals and carry a higher price than the same chipset that is put into a gaming card and marketed to gamers. The Professional cards have drivers that are tested to work with ANSYS and other CAD software, whereas the Gaming cards are tested to work with gaming software.
If a computer has a gaming card, it might work with ANSYS, but it might not. You have to test it to find out.
What graphics card is in the computer you are using?
Try updating the Graphics driver for your card to the latest release.
July 15, 2019 at 10:04 amRobAnsys Employee
It's been flagged here: please add details to this thread
- You must be logged in to reply to this topic.
Boost Ansys Fluent Simulations with AWS
Computational Fluid Dynamics (CFD) helps engineers design products in which the flow of fluid components is a significant challenge. These different use cases often require large complex models to solve on a traditional workstation. Click here to join this event to learn how to leverage Ansys Fluids on the cloud, thanks to Ansys Gateway powered by AWS.
Earth Rescue – An Ansys Online Series
The climate crisis is here. But so is the human ingenuity to fight it. Earth Rescue reveals what visionary companies are doing today to engineer radical new ideas in the fight against climate change. Click here to watch the first episode.
Subscribe to the Ansys Blog to get great new content about the power of simulation delivered right to your email on a weekly basis. With content from Ansys experts, partners and customers you will learn about product development advances, thought leadership and trends and tips to better use Ansys tools. Sign up here.
- how to improve the inflation quality at sharp corners?
- ANSYS Workbench Measuring within Design
- check element type
- The mesh file exporter could not resolve cyclic dependencies in overlapping contact regions error
- Meshing Error
- How to resolve Mesh Failure
- Conformal vs Non-Conformal Mesh
- Error in meshing
- execution error inside the mesher. The process suffered an unhandled exception or ran out of memory
- inflation created stairstep mesh at some location
© 2023 Copyright ANSYS, Inc. All rights reserved.