May 5, 2023 at 7:47 am
May 5, 2023 at 11:23 amAshish KhemkaAnsys Employee
Please see if the following link is of use to you: Experimental and numerical benchmark study of mode II interlaminar fracture toughness of unidirectional GFRP laminates under shear loading using the end-notched flexure (ENF) test - ScienceDirect
May 5, 2023 at 12:08 pmcéleste marechalSubscriber
Thank you for your answer. i'have already tried to simulate the pull out but i my results are not optimized and i don't know what caracteristics i have to enter specially for the CZM properties. i created a bonded contact between both solids and applied a fracture. should i enter a friction coefficient ? do i have to input an APDL command to do it ?
- You must be logged in to reply to this topic.
Boost Ansys Fluent Simulations with AWS
Computational Fluid Dynamics (CFD) helps engineers design products in which the flow of fluid components is a significant challenge. These different use cases often require large complex models to solve on a traditional workstation. Click here to join this event to learn how to leverage Ansys Fluids on the cloud, thanks to Ansys Gateway powered by AWS.
Earth Rescue – An Ansys Online Series
The climate crisis is here. But so is the human ingenuity to fight it. Earth Rescue reveals what visionary companies are doing today to engineer radical new ideas in the fight against climate change. Click here to watch the first episode.
Subscribe to the Ansys Blog to get great new content about the power of simulation delivered right to your email on a weekly basis. With content from Ansys experts, partners and customers you will learn about product development advances, thought leadership and trends and tips to better use Ansys tools. Sign up here.
- How to work with STL file?
- Rotate tool in ANSYS Design Modeler
- Using Symmetry in DesignModeler and Expanding the Results
- section plane
- ANSYS FLUENT – Operation would result in non manifold bodies
- material properties
- drawing a geometry by importing a table of points
- Geometry scaling
- Coordinates orientation
- “contact pair has no element in it.” how to resolve this problem
© 2023 Copyright ANSYS, Inc. All rights reserved.