TAGGED: Ansys Discovery
-
-
March 10, 2023 at 1:54 am
yoshito.ichinowatari.5d
Subscriber現在DiscoveryでCFD解析を実施しており、圧損を出力する為にプレーンの作成をしている。
現状
プレーンが大きすぎて見たい一か所ではなく複数の断面にまたがっている。質問
プレーンの大きさを編集することは可能でしょうか。可能であればご教示願います。
-
March 10, 2023 at 2:00 am
yoshito.ichinowatari.5d
Subscriber上記の質問に追加事項があります。
プレーンの大きさを任意(作業者の意図した大きさ)で作成する方法についても可能で有ればご教示願います。 -
March 10, 2023 at 2:06 am
Charudatta Bandgar
Forum ModeratorHello Takahiro Yamaguchi Can you help Yoshito Ichinowatari here?
-
March 13, 2023 at 4:07 am
tyamaguchi
Ansys Employeeプレーンをコンポーネントにしていただくと領域を跨がないようになります。
また、指定の大きさの平面を作成したい場合は、スケッチ機能で輪郭を作成していただきフィルで面を作成していただくことを提案いたします。プレーンよりもサーフェスの方が融通が利きますのでお試しいただけると幸いです。
Yoshito Ichinowatari
-
- You must be logged in to reply to this topic.

Boost Ansys Fluent Simulations with AWS
Computational Fluid Dynamics (CFD) helps engineers design products in which the flow of fluid components is a significant challenge. These different use cases often require large complex models to solve on a traditional workstation. Click here to join this event to learn how to leverage Ansys Fluids on the cloud, thanks to Ansys Gateway powered by AWS.

Earth Rescue – An Ansys Online Series
The climate crisis is here. But so is the human ingenuity to fight it. Earth Rescue reveals what visionary companies are doing today to engineer radical new ideas in the fight against climate change. Click here to watch the first episode.

Ansys Blog
Subscribe to the Ansys Blog to get great new content about the power of simulation delivered right to your email on a weekly basis. With content from Ansys experts, partners and customers you will learn about product development advances, thought leadership and trends and tips to better use Ansys tools. Sign up here.
- How to work with STL file?
- Rotate tool in ANSYS Design Modeler
- section plane
- Using Symmetry in DesignModeler and Expanding the Results
- ANSYS FLUENT – Operation would result in non manifold bodies
- drawing a geometry by importing a table of points
- material properties
- Coordinates orientation
- “contact pair has no element in it.” how to resolve this problem
- Parameters not imported into Workbench 18.2 from Solidworks/Inventor
-
8772
-
4658
-
3151
-
1678
-
1456
© 2023 Copyright ANSYS, Inc. All rights reserved.