Domain interface as source

    • Goenitz


      I want to model a surface reaction (with wall thickness neglected) between two domains. Now boundary/region between domain is interface. I do not want it to be a thin material but a wall with no thickness. So:

      1. Should I go to 'Non-Overlap condition' and chose wall? But CFX guide says 'non-overlap' condition is for when one geometry rotates. Whereas there is no motion in my case.

      2.  Or go to 'Additional Interface models' then to 'Mass and momentum' and then 'wall' and then in 'interface model' and then 'thin material'?



Viewing 0 reply threads
  • You must be logged in to reply to this topic.