February 28, 2017 at 9:49 amNikitaAnsys Employee
How is the DPM concentration calculated in FLUENT?
March 21, 2017 at 12:02 pmVishal GanoreAnsys Employee
The DPM concentration is defined as: DPM concentration = (Avg. particle mass in cell * Part resi. Time * Strength of particle) / Cell volume ...1 Strength of particle = number in parcel / dt_flow ...2a = total particle flow rate / mass of single particle in the stream ....2b From equation 1 and equation 2b, DPM conc. = (Avg. particle mass in cell * Part resi. Time * Total particle flow rate) / (mass of single particle in stream * cell volume).....3
- You must be logged in to reply to this topic.
Earth Rescue – An Ansys Online Series
The climate crisis is here. But so is the human ingenuity to fight it. Earth Rescue reveals what visionary companies are doing today to engineer radical new ideas in the fight against climate change. Click here to watch the first episode.
Subscribe to the Ansys Blog to get great new content about the power of simulation delivered right to your email on a weekly basis. With content from Ansys experts, partners and customers you will learn about product development advances, thought leadership and trends and tips to better use Ansys tools. Sign up here.
- Suppress Fluent to open with GUI while performing in journal file
- Floating point exception in Fluent
- What are the differences between CFX and Fluent?
- Heat transfer coefficient
- Getting graph and tabular data from result in workbench mechanical
- The solver failed with a non-zero exit code of : 2
- Difference between K-epsilon and K-omega Turbulence Model
- Time Step Size and Courant Number
- Mesh Interfaces in ANSYS FLUENT
- error in cfd post
© 2023 Copyright ANSYS, Inc. All rights reserved.