September 21, 2023 at 11:03 pmAmgad SalamaSubscriber
I'm modeling a droplet moving over a surface and would like to monitor and save the location of its centroid over time, can anyone suggest a method in Fluent to do so? Thanks in advance
September 22, 2023 at 6:40 amSRPAnsys Employee
You can try to track the particles. You can check user's guide: 23.9. Postprocessing for the Discrete Phase (ansys.com)
September 22, 2023 at 5:23 pmAmgad SalamaSubscriber
Thanks for your reply. In fact, I'm modeling the behavior of a single droplet using VOF (I'm not using DEM) and I would like to track the location of the droplet (maybe its centroid) with time as well as its speed and save it as an output file. The output data may look like (time, x, y, z, ux, uy, uz).
Thanks once again
- You must be logged in to reply to this topic.
Boost Ansys Fluent Simulations with AWS
Earth Rescue – An Ansys Online Series
- Floating point exception in Fluent
- What are the differences between CFX and Fluent?
- Heat transfer coefficient
- Difference between K-epsilon and K-omega Turbulence Model
- Getting graph and tabular data from result in workbench mechanical
- The solver failed with a non-zero exit code of : 2
- Time Step Size and Courant Number
- Mesh Interfaces in ANSYS FLUENT
- Suppress Fluent to open with GUI while performing in journal file
- error: Received signal SIGSEGV
© 2023 Copyright ANSYS, Inc. All rights reserved.