April 26, 2023 at 12:56 pmChinmaya Kumar PatraSubscriber
I have a rectangular channel with single phase adabatic flow in which i am calculating the transient variation of dynamic pressure (area wehighted avg) and velocity (area wehighted avg) at different locations (0 mm-inlet , 0.5 mm, 1.5 mm, 2.5mm, 3.5 mm and 4.5mm-outlet) along the length of channel as shown in plots below. It can be seen from velocity plot, the oulet velocity is less as compared velocity at inlet but the dynamic pressure trend is opposite, how is it possible? as the dynamic pressure is a function velocity and density (remians constant through the simualtion).
In addtion the velocity trends for diferent locations are not matching with the dynamics pressure trend.
April 27, 2023 at 8:53 amRobAnsys Employee
- You must be logged in to reply to this topic.
Boost Ansys Fluent Simulations with AWS
Computational Fluid Dynamics (CFD) helps engineers design products in which the flow of fluid components is a significant challenge. These different use cases often require large complex models to solve on a traditional workstation. Click here to join this event to learn how to leverage Ansys Fluids on the cloud, thanks to Ansys Gateway powered by AWS.
Earth Rescue – An Ansys Online Series
The climate crisis is here. But so is the human ingenuity to fight it. Earth Rescue reveals what visionary companies are doing today to engineer radical new ideas in the fight against climate change. Click here to watch the first episode.
Subscribe to the Ansys Blog to get great new content about the power of simulation delivered right to your email on a weekly basis. With content from Ansys experts, partners and customers you will learn about product development advances, thought leadership and trends and tips to better use Ansys tools. Sign up here.
- Suppress Fluent to open with GUI while performing in journal file
- Floating point exception in Fluent
- What are the differences between CFX and Fluent?
- Heat transfer coefficient
- Getting graph and tabular data from result in workbench mechanical
- The solver failed with a non-zero exit code of : 2
- Difference between K-epsilon and K-omega Turbulence Model
- Time Step Size and Courant Number
- Mesh Interfaces in ANSYS FLUENT
- error: Received signal SIGSEGV
© 2023 Copyright ANSYS, Inc. All rights reserved.