July 20, 2020 at 10:07 am
July 20, 2020 at 10:34 amRobAnsys Employee
How big is the enclosure relative to the body it's surrounding? Is that body a solid volume or a collection of surfaces?
July 20, 2020 at 10:38 amIbrahimabdullahSubscriber
its about 1150 mm away from the surface for all sides and 2850 mm from the outlet side. the body is collection of surfaces (aircraft)
July 21, 2020 at 4:38 amKeyur KanadeAnsys Employee
Make sure you have a solid body for aircraft object.
Please check geometry in SpaceClaim.
Select geometry in structure tree --> Use right click --> Select Check Geometry.
The geometry should be error free to proceed.
If geometry has any errors, please modify/recreate geometry at those places.
If this helps, please mark this post as 'Is Solution' to help others.
- You must be logged in to reply to this topic.
Simulation World 2022
Check out more than 70 different sessions now available on demand. Get inspired as you hear from visionary companies, leading researchers and educators from around the globe on a variety of topics from life-saving improvements in healthcare, to bold new realities of space travel. Take a leap of certainty and check out a session today here.
Earth Rescue – An Ansys Online Series
The climate crisis is here. But so is the human ingenuity to fight it. Earth Rescue reveals what visionary companies are doing today to engineer radical new ideas in the fight against climate change. Click here to watch the first episode.
Subscribe to the Ansys Blog to get great new content about the power of simulation delivered right to your email on a weekly basis. With content from Ansys experts, partners and customers you will learn about product development advances, thought leadership and trends and tips to better use Ansys tools. Sign up here.
- How to work with STL file?
- drawing a geometry by importing a table of points
- Using Symmetry in DesignModeler and Expanding the Results
- section plane
- material properties
- Rotate tool in ANSYS Design Modeler
- ANSYS FLUENT – Operation would result in non manifold bodies
- Parameters not imported into Workbench 18.2 from Solidworks/Inventor
- Geometry scaling
- Convert Surface body to solid
© 2022 Copyright ANSYS, Inc. All rights reserved.