Error in Parametric study update
-
-
(DP 1) The Setup component in Static Structural for Design Point 1 requires user input before it can be updated. For instructions on how to address the cell in its current state, click the blue triangle in the lower right corner of the cell in the Project Schematic.
Am having the above error message when am performing a parametric study. I have checked the projetc shematic for the blue arrow as instructed but it says it up to date. see attached project shematic
Please kindly help to sort this issue. Many thanks.
-
-
- You must be logged in to reply to this topic.
Earth Rescue – An Ansys Online Series
The climate crisis is here. But so is the human ingenuity to fight it. Earth Rescue reveals what visionary companies are doing today to engineer radical new ideas in the fight against climate change. Click here to watch the first episode.
Ansys Blog
Subscribe to the Ansys Blog to get great new content about the power of simulation delivered right to your email on a weekly basis. With content from Ansys experts, partners and customers you will learn about product development advances, thought leadership and trends and tips to better use Ansys tools. Sign up here.
-
Rob
-
Guilin Sun
-
peteroznewman
-
DrAmine
-
javat33489
You are navigating away from the AIS Discovery experience