October 21, 2020 at 4:26 pmmel123SubscriberI am currently working on an evaporation/solar absorber project and was hoping to model the mass and energy balances using Ansys. Currently, I have results from lab experiments that determined the evaporation rate of water within the solar absorber. I am wondering if there is a way in Ansys to input the evaporation rate to solve the temperature profile and heat-transfer of a large scale system.n
October 22, 2020 at 1:04 amKarthik RAdministratorHi,nYes, you should be able to add evaporation rate to your model. You can do it a couple of ways. nYou can solve a multiphase model and add this as a mass transfer term. nOr, you could do this another way. You could also add the evaporation as a volumetric source term. nYou should be able to find some tutorials on YouTube. Please use the keywords - Fluent modeling evaporation. nThank you.nKarthikn
- You must be logged in to reply to this topic.
Simulation World 2022
Check out more than 70 different sessions now available on demand. Get inspired as you hear from visionary companies, leading researchers and educators from around the globe on a variety of topics from life-saving improvements in healthcare, to bold new realities of space travel. Take a leap of certainty and check out a session today here.
Earth Rescue – An Ansys Online Series
The climate crisis is here. But so is the human ingenuity to fight it. Earth Rescue reveals what visionary companies are doing today to engineer radical new ideas in the fight against climate change. Click here to watch the first episode.
Subscribe to the Ansys Blog to get great new content about the power of simulation delivered right to your email on a weekly basis. With content from Ansys experts, partners and customers you will learn about product development advances, thought leadership and trends and tips to better use Ansys tools. Sign up here.
- Suppress Fluent to open with GUI while performing in journal file
- Heat transfer coefficient
- What are the differences between CFX and Fluent?
- Floating point exception in Fluent
- The solver failed with a non-zero exit code of : 2
- Getting graph and tabular data from result in workbench mechanical
- Difference between K-epsilon and K-omega Turbulence Model
- Time Step Size and Courant Number
- Mesh Interfaces in ANSYS FLUENT
- error in cfd post
© 2022 Copyright ANSYS, Inc. All rights reserved.