Materials

Materials

Explain Solid 65 and Link 180 command

Tagged: 

    • ADEEL_khan
      Subscriber
      I watched many lectures on Youtube and other forums regarding Reinforced concrete modeling, Like Dr. Dylo lectures. He used Solid65 and Link 180 commands. Anyone please expain the commands below such that I can modify the commands according to my concrete and steel properties in US customary units.nCONCRETE COMMANDS:nET,MATID,SOLID65nR,MATID,0,0,0,0,0,0nRMORE,0,0,0,0,0nnMP,EX,MATID,29250nMP,PRXY,MATID,0.2nMPTEMP,MATID,0nnTB,CONCR,MATID,1,9nTBTEMP,22nTBDATA,1,0.3,0.8,1.5,25nnTB,MISO,MATID,1,35,0nTBTEMP,22 nTBPT,,0.0001,2.925nTBPT,,0.0002,5.7nTBPT,,0.0003,8.325nTBPT,,0.0004,10.8nTBPT,,0.0005,13.125nTBPT,,0.0006,15.3nTBPT,,0.0007,17.325nTBPT,,0.0008,19.2nTBPT,,0.0009,20.925nTBPT,,0.001,22.5nTBPT,,0.0011,23.925nTBPT,,0.0012,25.2nTBPT,,0.0013,26.325nTBPT,,0.0014,27.3nTBPT,,0.0015,28.125nTBPT,,0.0016,28.8nTBPT,,0.0017,29.325nTBPT,,0.0018,29.7nTBPT,,0.0019,29.925nTBPT,,0.002,30nTBPT,,0.0021,30nTBPT,,0.0022,30nTBPT,,0.0023,30nTBPT,,0.0024,30nTBPT,,0.0025,30nTBPT,,0.0026,30nTBPT,,0.0027,30nTBPT,,0.0028,30nTBPT,,0.0029,30nTBPT,,0.003,30nTBPT,,0.0031,30nTBPT,,0.0032,30nTBPT,,0.0033,30nTBPT,,0.0034,30nTBPT,,0.0035,30nREBAR COMMANDS:nET,MATID,LINK180 nMPDATA,EX,MATID,,2e5nMPDATA,PRXY,MATID,,0.3 nTB,BISO,MATID,1,2 nTBDATA,,460,2100 nR,MATID,12,,0 nnPRE PROCESSOR COMMANDS:n/PREP7nESEL,S,ENAME,,65nESEL,A,ENAME,,180nALLSEL,BELOW,ELEMnCEINTF,0.001,nALLSEL,ALLn/SOLUnOUTRES,ALL,ALLnnPOST PROCESSOR COMMANDS:n/SHOW,pngn/ANG,1,n/VIEW,1,0,0,0n/DEVICE,VECTOR,ONnSET,Last !Outputs final result setnPLCRACK,0,0 !0,0 all cracks, 0,1 first crack, 0,2 second crack, etc. nThanksnRegards,nADEEL_khann
    • Ashish Khemka
      Ansys Employee
      Hi Adeel,nnPlease refer to the discussion below:nnHi Adeel,nnPlease refer to the discussion below:nnnnRegards,nAshish Khemkan
    • ADEEL_khan
      Subscriber
      Thank you so much sir, still no clue.... I am very confused. Nobody is explaining step by step the solid65 and link 180 command. Very much confusedn
Viewing 2 reply threads
  • You must be logged in to reply to this topic.