-
-
June 24, 2023 at 2:26 pm
Agung Limowa
Subscriber -
June 26, 2023 at 5:25 am
Keyur Kanade
Ansys EmployeeCan you please provide more details here. What are you using? Is it Fluent Meshing or Ansys Meshing?
Regards,
Keyur
How to access Ansys Online Help Document
Guidelines on the Student Community
Fluids Engineering Courses | Ansys Innovation Courses
-
June 29, 2023 at 10:42 am
Agung Limowa
Subscriberi'm using ansys meshing and it has around 8 million cells but there is around 16 cells <0.1 in ortho quality, is it fine? i can' find a way to get rid of those cells
-
June 29, 2023 at 10:44 am
Agung Limowa
Subscriberi know that is <0.1 is bad but i mean is it really affected the calculation and giving some error or it just make the simulation less accurate ?
-
June 29, 2023 at 10:58 am
Rob
Ansys EmployeeIt depends. If those cells are in regions with high gradients you'll potentially cause the solver to fail and/or produce poor results. If not much is happening you might get lucky and nothing bad happens.
-
- You must be logged in to reply to this topic.

Boost Ansys Fluent Simulations with AWS
Computational Fluid Dynamics (CFD) helps engineers design products in which the flow of fluid components is a significant challenge. These different use cases often require large complex models to solve on a traditional workstation. Click here to join this event to learn how to leverage Ansys Fluids on the cloud, thanks to Ansys Gateway powered by AWS.

Earth Rescue – An Ansys Online Series
The climate crisis is here. But so is the human ingenuity to fight it. Earth Rescue reveals what visionary companies are doing today to engineer radical new ideas in the fight against climate change. Click here to watch the first episode.

Ansys Blog
Subscribe to the Ansys Blog to get great new content about the power of simulation delivered right to your email on a weekly basis. With content from Ansys experts, partners and customers you will learn about product development advances, thought leadership and trends and tips to better use Ansys tools. Sign up here.
- Floating point exception in Fluent
- What are the differences between CFX and Fluent?
- Heat transfer coefficient
- Difference between K-epsilon and K-omega Turbulence Model
- Getting graph and tabular data from result in workbench mechanical
- The solver failed with a non-zero exit code of : 2
- Suppress Fluent to open with GUI while performing in journal file
- Mesh Interfaces in ANSYS FLUENT
- Time Step Size and Courant Number
- error: Received signal SIGSEGV
-
7626
-
4442
-
2953
-
1427
-
1322
© 2023 Copyright ANSYS, Inc. All rights reserved.