Fluids

Fluids

Flow through hydrostatic bearing

    • Akhil96
      Subscriber

      Hello,


      I have to run a simulation for hydrostatic bearing with single circular recess. The radius of the recess is 0.050m and depth is 5mm. The pressure in the chamber was calculated to be 111300 pa. I want to apply this pressure to the chamber during my simulation. How can I do this.


      Regards


      Akhil

    • Rob
      Ansys Employee

      What are you trying to model?

Viewing 1 reply thread
  • You must be logged in to reply to this topic.