Learning Forum

[sergiofr]

Hi,

I am trying to launch a fluent meshing in batch mode. The point is that I generate a reference script using Ansys Fluent Meshing windows interface (/file/write/start-journal). This reference script contiains all the steps that I perform in an interactive GUI session to configure the mesh generation. The point is that for some reasons I need to generate my mesh in a linux machine where it is not possible to launch the GUI session. Therefore, I need to generate the mesh using a journal script. To do this, I employed the journal generated by Ansys Fluent Meshing during the interactive session but with some modifications (geometry path and mesh saving path).

When I do that the program crashes outputing the following output:

I have looked around but I cannot guess what is happening, any ideas?

Thanks in advance

Best Regards

Sergio

[Keyur Kanade]

Please check 

Command for Fluent Meshing to read journal in batch mode (ansys.com)

https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=&cad=rja&uact=8&ved=2ahUKEwjyxdiEp-D9AhX6yHMBHVi0A-sQwqsBegQICBAE&url=https%3A%2F%2Fwww.youtube.com%2Fwatch%3Fv%3DVbYud9l7X0I&usg=AOvVaw2ZY0vQ__Wal6xrxDvWu6ak

 

Please go through help manual for more details 

Regards,

Keyur

How to access Ansys Online Help Document

Guidelines on the Student Community

Fluids Engineering Courses | Ansys Innovation Courses

 

[Keyur Kanade]

For batch mode it is recommended to use TUI commands as shown in video below.

Please check this video. 

[sergiofr]

Hi Keyur,

Thanks for you reply and help. In my case, I finally solved the problem upgrading Fluent version from 22.2 to 23.1. Now, everything works fine.

Best Regards,

Sergio