July 4, 2019 at 8:00 amDennis91Subscriber
I have a question concerning the periodic symmetry of a rotating mesh in Fluent. This is part of my master thesis.
The model is a stage of a centrifugal compressor. Here, the periodic symmetry should be exploited so the geometry can be divided into 7 sections (51.4 degrees). The compressor wheel is to rotate in the housing and I load a structured mesh.
What option is there to solve the described problem without constantly load a new mesh. What would the alternatives be?
Thanks in advance
July 4, 2019 at 3:07 pmRobAnsys Employee
Have a look in the 2019 documentation for Fluent, and then Tutorial 10. I think that'll answer your question.
July 4, 2019 at 5:55 pm
- You must be logged in to reply to this topic.
Boost Ansys Fluent Simulations with AWS
Computational Fluid Dynamics (CFD) helps engineers design products in which the flow of fluid components is a significant challenge. These different use cases often require large complex models to solve on a traditional workstation. Click here to join this event to learn how to leverage Ansys Fluids on the cloud, thanks to Ansys Gateway powered by AWS.
Earth Rescue – An Ansys Online Series
The climate crisis is here. But so is the human ingenuity to fight it. Earth Rescue reveals what visionary companies are doing today to engineer radical new ideas in the fight against climate change. Click here to watch the first episode.
Subscribe to the Ansys Blog to get great new content about the power of simulation delivered right to your email on a weekly basis. With content from Ansys experts, partners and customers you will learn about product development advances, thought leadership and trends and tips to better use Ansys tools. Sign up here.
- Suppress Fluent to open with GUI while performing in journal file
- Floating point exception in Fluent
- What are the differences between CFX and Fluent?
- Heat transfer coefficient
- Getting graph and tabular data from result in workbench mechanical
- The solver failed with a non-zero exit code of : 2
- Difference between K-epsilon and K-omega Turbulence Model
- Time Step Size and Courant Number
- Mesh Interfaces in ANSYS FLUENT
- error in cfd post
© 2023 Copyright ANSYS, Inc. All rights reserved.