Fluent里如何获取压力梯度？
-
-
-
在Fluent里获取压力梯度的方法如下：在计算之前输入命令solve/set/expert后回车，然后根据提示输入yes。如下图所示。
> solve/set/expert
Save cell residuals for post-processing? [no] yes
Keep temporary solver memory from being freed? [no] yes
Allow selection of all applicable discretization schemes? [no] yes
这样，计算结束后就可以在后处理中看到压力梯度这个参数。如下图显示的是某内流场某截面压力云图和Y方向的压力梯度。
-
- 您必须登录才能回复此主题。
Boost Ansys Fluent Simulations with AWS
Computational Fluid Dynamics (CFD) helps engineers design products in which the flow of fluid components is a significant challenge. These different use cases often require large complex models to solve on a traditional workstation. Click here to join this event to learn how to leverage Ansys Fluids on the cloud, thanks to Ansys Gateway powered by AWS.
Earth Rescue – An Ansys Online Series
The climate crisis is here. But so is the human ingenuity to fight it. Earth Rescue reveals what visionary companies are doing today to engineer radical new ideas in the fight against climate change. Click here to watch the first episode.
Ansys Blog
Subscribe to the Ansys Blog to get great new content about the power of simulation delivered right to your email on a weekly basis. With content from Ansys experts, partners and customers you will learn about product development advances, thought leadership and trends and tips to better use Ansys tools. Sign up here.
-
Rob
-
Guilin Sun
-
peteroznewman
-
Ashish Kumar
-
DrAmine
You are navigating away from the AIS Discovery experience