October 27, 2018 at 7:12 pmammoreySubscriber
I'm PhD student working on the fracture analysis for semi-elliptical cracks, I'm working on multiple cracks. Actually finished the modelling and meshing for both body and cracks but when I try to do the analysis from the fracture tool, the program asking me to choose only one of the cracks ! so I could not finish my analysis.
The problem which faced me attached bellow in simple example.. Thank in advance
October 27, 2018 at 8:12 pm
October 28, 2018 at 11:23 amammoreySubscriber
Ohhh , I got it .. Thank you so much for your help ..
December 17, 2018 at 8:18 pm
December 17, 2018 at 8:45 pmammoreySubscriber
simply you have to choose the geometry that you want to insert the crack . For me im not familiar with the version you are using , I use v 19.0
- You must be logged in to reply to this topic.
Earth Rescue – An Ansys Online Series
The climate crisis is here. But so is the human ingenuity to fight it. Earth Rescue reveals what visionary companies are doing today to engineer radical new ideas in the fight against climate change. Click here to watch the first episode.
Subscribe to the Ansys Blog to get great new content about the power of simulation delivered right to your email on a weekly basis. With content from Ansys experts, partners and customers you will learn about product development advances, thought leadership and trends and tips to better use Ansys tools. Sign up here.
- Saving & sharing of Working project files in .wbpz format
- Understanding Force Convergence Solution Output
- An Unknown error occurred during solution. Check the Solver Output…..
- Solver Pivot Warning in Beam Element Model
- Colors and Mesh Display
- How to calculate the residual stress on a coating by Vickers indentation?
- whether have the difference between using contact and target bodies
- What is the difference between bonded contact region and fixed joint
- The solver engine was unable to converge on a solution for the nonlinear problem as constrained.
- User manual
© 2023 Copyright ANSYS, Inc. All rights reserved.