July 20, 2019 at 7:00 pmkfouladiSubscriber
I am using ANSYS WorkBenck and I am interested in FSI analysis of a "flexible" oscillating airfoil in water. I am able to simulate the oscillating "rigid" airfoil using dynamic meshing through rigid body motion (CG_Motion UDF). However, I am not sure of the approach if the airfoil is no longer rigid. In this case, I am assuming the mesh must go through rigid body motion but it needs to be re-meshed as airfoil shape changes. Fluent dynamic mesh only allows me to assign the mesh zone only one, either rigid body or deforming. Any ideas? Many thanks.
July 21, 2019 at 2:23 ampeteroznewmanSubscriber
July 22, 2019 at 4:09 pmkfouladiSubscriber
Thanks for the tutorial video. It is very helpful. However, I wanted to accomplish the airfoil oscillation inside fluent, similar to the attached ANSYS documents. Only this time, I want the airfoil to be of a flexible (deforming) material. Hope that make sense.
- You must be logged in to reply to this topic.
Boost Ansys Fluent Simulations with AWS
Computational Fluid Dynamics (CFD) helps engineers design products in which the flow of fluid components is a significant challenge. These different use cases often require large complex models to solve on a traditional workstation. Click here to join this event to learn how to leverage Ansys Fluids on the cloud, thanks to Ansys Gateway powered by AWS.
Earth Rescue – An Ansys Online Series
The climate crisis is here. But so is the human ingenuity to fight it. Earth Rescue reveals what visionary companies are doing today to engineer radical new ideas in the fight against climate change. Click here to watch the first episode.
Subscribe to the Ansys Blog to get great new content about the power of simulation delivered right to your email on a weekly basis. With content from Ansys experts, partners and customers you will learn about product development advances, thought leadership and trends and tips to better use Ansys tools. Sign up here.
- Suppress Fluent to open with GUI while performing in journal file
- Floating point exception in Fluent
- What are the differences between CFX and Fluent?
- Heat transfer coefficient
- Getting graph and tabular data from result in workbench mechanical
- The solver failed with a non-zero exit code of : 2
- Difference between K-epsilon and K-omega Turbulence Model
- Time Step Size and Courant Number
- Mesh Interfaces in ANSYS FLUENT
- error in cfd post
© 2023 Copyright ANSYS, Inc. All rights reserved.