July 18, 2019 at 9:23 amDanial990Subscriber
i must get a State space model of my System, which has 114000 nodes und 52000 elements.to doing that i found a Paper, which use Matlab for calculation but i have very Huge Matrix (300000,300000) and its not Possible in my case to use Matlab.i've heared that i can use direkt ANSYS to get a reduced State space Model but i dont know how. i would be Thankful if anybody has a same Experience and share it with me.
July 18, 2019 at 11:24 ampeteroznewmanSubscriber
I have no experience with this but I searched the ANSYS Help and found what might be a relevant hit.
14.17. Reduced-Order Modeling for State-Space Matrices Export
July 18, 2019 at 11:32 amjj77Subscriber
Same for me 0% exp.
This might help
A lot of things on the internet and I think a book also.
August 4, 2019 at 7:05 pmDanial990Subscriber
thanks guys for your helps. i treid to do that with a Simlorer and i can do that now like this Video:
v=4oF0XFDxXpQ&list= PL2wHqqH5J8hY819yv6t1QpjJZibwF HPsq&index=33
but i dont know how can i Export my ROM Model from Simplorer as a FMU Data to import in Simulink.has someone same Experience? i would appreciate that.
- You must be logged in to reply to this topic.
Boost Ansys Fluent Simulations with AWS
Computational Fluid Dynamics (CFD) helps engineers design products in which the flow of fluid components is a significant challenge. These different use cases often require large complex models to solve on a traditional workstation. Click here to join this event to learn how to leverage Ansys Fluids on the cloud, thanks to Ansys Gateway powered by AWS.
Earth Rescue – An Ansys Online Series
The climate crisis is here. But so is the human ingenuity to fight it. Earth Rescue reveals what visionary companies are doing today to engineer radical new ideas in the fight against climate change. Click here to watch the first episode.
Subscribe to the Ansys Blog to get great new content about the power of simulation delivered right to your email on a weekly basis. With content from Ansys experts, partners and customers you will learn about product development advances, thought leadership and trends and tips to better use Ansys tools. Sign up here.
- Saving & sharing of Working project files in .wbpz format
- Solver Pivot Warning in Beam Element Model
- Understanding Force Convergence Solution Output
- An Unknown error occurred during solution. Check the Solver Output…..
- What is the difference between bonded contact region and fixed joint
- whether have the difference between using contact and target bodies
- The solver engine was unable to converge on a solution for the nonlinear problem as constrained.
- User manual
- Colors and Mesh Display
- material damping and modal analysis
© 2023 Copyright ANSYS, Inc. All rights reserved.