Optical

Optical

Grating coupler simulation (https://optics.ansys.com/hc/en-us/articles/36004230)

    • dubey
      Subscriber
      (1) 2D simulation already optimize the fibre position x then why we need to do it again in the 3d simulation.
      (2) Simulation does not optimize the pitch depth, why?
      (3) How does the simulation optimize  say grating pitch and duty cycle along with the fibre position x? Does it optimize it simultaneously or does it optimize one and then moving onto another,  so on…?
    • Guilin Sun
      Ansys Employee

      Hi, Lumerical has dedicated  English, Chinese and Korean forums:

      https://forum.ansys.com/forums/forum/discuss-simulation/photonics/

      https://forum.ansys.com/forums/forum/discuss-simulation/photonics/photonics-chinese/

      https://forum.ansys.com/forums/forum/discuss-simulation/photonics/photonics-korean/

      Next time please post in the proper forum in order to get quick reply.

      A1: Since 2D is a simplified method and the actual device is 3D

      A2: You can optimize it but from my experience. limited to process techniques, people have fixed depth parameters.

      A3: In optimization the algorithm will pick up a set of parameters to be optimized for each generation. So they are optimized all tegother. Please refer https://optics.ansys.com/hc/en-us/articles/360034922953-Optimization-utility

Viewing 1 reply thread
  • You must be logged in to reply to this topic.