Discovery Import

Discovery Import

Hardware/software compatibility

    • pierre.pitot

      Hi Guys,

      Unable to go further than opening the geometry, then the AIM Ansys "stall". If I open an example, I can see the geometry and the meshing but after a few more click I have a white screen as you can see in the attached document.

      Thanks for your help.

    • Subashni Ravichandran
      Ansys Employee

      Hi  IDpartner

      Could you please confirm if you have the minimum required hardware, which is as follows:

      • 64-bit Intel or AMD system, running Windows 7, 8 or 10.
      • 4 GB RAM (8 GB minimum for Discovery AIM)
      • A dedicated graphics card with latest drivers and at least 1GB video RAM, capable of supporting OpenGL 4.5 and DirectX 9c, or higher.  Use of integrated graphics (e.g. Intel HD/IRIS) is not recommended.  See below for special graphics requirements for ANSYS Discovery Live.
Viewing 1 reply thread
  • You must be logged in to reply to this topic.