-
-
November 29, 2022 at 7:54 pm
-
November 30, 2022 at 12:43 am
peteroznewman
SubscriberRMB = Right Mouse Button also known as right click.
-
November 30, 2022 at 8:32 am
Erik Kostson
Ansys EmployeeHi
We have physics regions in acoustic analysis - these can be either acoustic or structural regions. So all of the bodies need to have these regions defined, and you are missing one. So assign one to all bodies.
See here where they have both regions defined:
Erik
-
- You must be logged in to reply to this topic.

Earth Rescue – An Ansys Online Series
The climate crisis is here. But so is the human ingenuity to fight it. Earth Rescue reveals what visionary companies are doing today to engineer radical new ideas in the fight against climate change. Click here to watch the first episode.

Ansys Blog
Subscribe to the Ansys Blog to get great new content about the power of simulation delivered right to your email on a weekly basis. With content from Ansys experts, partners and customers you will learn about product development advances, thought leadership and trends and tips to better use Ansys tools. Sign up here.
- Saving & sharing of Working project files in .wbpz format
- An Unknown error occurred during solution. Check the Solver Output…..
- Understanding Force Convergence Solution Output
- Solver Pivot Warning in Beam Element Model
- Colors and Mesh Display
- How to calculate the residual stress on a coating by Vickers indentation?
- whether have the difference between using contact and target bodies
- What is the difference between bonded contact region and fixed joint
- The solver engine was unable to converge on a solution for the nonlinear problem as constrained.
- User manual
-
2524
-
2066
-
1279
-
1096
-
457
© 2023 Copyright ANSYS, Inc. All rights reserved.