April 11, 2020 at 6:13 pm
April 13, 2020 at 8:40 amAniketAnsys Employee
Do not drag each cell to the Modal system from Static!
Drag and drop the Modal system from the Analysis system on the existing Static structural system's "Model" cell or "solution" cell directly.
April 13, 2020 at 1:29 pmlildogz96Subscriber
I tried that too, but it is not working for some reason
April 13, 2020 at 5:35 pmTWard48Subscriber
Did you figure it out? I just realized I asked basically the same question.
Edited to add: you aren't in Prof Kumar's FEA class at Umass Lowell by any chance? Your problem and set up look exactly like what I'm dealing with
April 14, 2020 at 12:28 amTWard48Subscriber
OK, I think I figured it out, at least sort of. Take a new workbench project, insert the final analysis first, right click on setup, select transfer data from new, and select the desired previous analysis type. Data, Geometry and model will all be linked, as well as the solution from the previous analysis going into the setup of the following analysis. What I still don't understand, is why I can't do a static analysis, then insert a modal analysis and take the model and solution from the previous static analysis and insert it into the new modal analysis, as would seem more intuitive to me, doing it in sequential order, as opposed to the reverse sequential order ANSYS seems to mandate. Unless I am still missing something?
April 14, 2020 at 1:21 amAniketAnsys Employee
lildogz96, Check the help page here:
April 15, 2020 at 12:57 amlildogz96Subscriber
Thanks, That helped. I'm working out of the Workbench 2019 book, but using 2020 R1. So what I did was I deleted the modal analysis blocks like you said, and then inserted new ones. Then I was able to drag the model from the modal analysis to the static structural. Then I right clicked on the solution in static structural and transferred the data to a new modal block. I was working on tutorial 11.1 in Finite Element Simulations with ANSYS Workbench 19.
April 20, 2020 at 3:36 amAniketAnsys Employee
lildogz96, Please mark the answer as solved if that helped you to resolve your issue.
- You must be logged in to reply to this topic.
Simulation World 2022
Check out more than 70 different sessions now available on demand. Get inspired as you hear from visionary companies, leading researchers and educators from around the globe on a variety of topics from life-saving improvements in healthcare, to bold new realities of space travel. Take a leap of certainty and check out a session today here.
Earth Rescue – An Ansys Online Series
The climate crisis is here. But so is the human ingenuity to fight it. Earth Rescue reveals what visionary companies are doing today to engineer radical new ideas in the fight against climate change. Click here to watch the first episode.
Subscribe to the Ansys Blog to get great new content about the power of simulation delivered right to your email on a weekly basis. With content from Ansys experts, partners and customers you will learn about product development advances, thought leadership and trends and tips to better use Ansys tools. Sign up here.
- How to calculate the residual stress on a coating by Vickers indentation?
- An Unknown error occurred during solution. Check the Solver Output…..
- Saving & sharing of Working project files in .wbpz format
- Solver Pivot Warning in Beam Element Model
- Understanding Force Convergence Solution Output
- whether have the difference between using contact and target bodies
- Colors and Mesh Display
- The solver engine was unable to converge on a solution for the nonlinear problem as constrained.
- Massive amount of memory (RAM) required for solve
- What is the difference between bonded contact region and fixed joint
© 2022 Copyright ANSYS, Inc. All rights reserved.