TAGGED: fensap, fensap-ice
February 23, 2023 at 9:29 amShaikh ZaherSubscriber
Dear FENSAP R&D Team,
Firstly, I would like to express my gratitude to your team for your continuous efforts in enhancing the icing research capabilities in ANSYS.
I am currently trying to post-process HTC data for a 3D wing on FENSAP. However, I have encountered the issue that the data is not directly available from the VIEWMERCIL tool.
During the 1st icing workshop, I saw a graph presented by Isik Ozcer which is relevant to my research. Could you kindly inform me of the steps and equation used for generating the graph?
Thank you for your assistance.
March 7, 2023 at 12:24 pmShoaib ShahAnsys Employee
Thanks for your kind words and comments. Regarding your query, when you open your ice solution, the field to select is "Ch". This can be seen in your screen shot. Hopefully this answers your question.
March 8, 2023 at 7:51 amShaikh ZaherSubscriber
Thank you for clarifying my doubt about "Ch". I wasn't sure if it was an abbreviation of HTC or some other field, I hope this helps others too.
- You must be logged in to reply to this topic.
Boost Ansys Fluent Simulations with AWS
Computational Fluid Dynamics (CFD) helps engineers design products in which the flow of fluid components is a significant challenge. These different use cases often require large complex models to solve on a traditional workstation. Click here to join this event to learn how to leverage Ansys Fluids on the cloud, thanks to Ansys Gateway powered by AWS.
Earth Rescue – An Ansys Online Series
The climate crisis is here. But so is the human ingenuity to fight it. Earth Rescue reveals what visionary companies are doing today to engineer radical new ideas in the fight against climate change. Click here to watch the first episode.
Subscribe to the Ansys Blog to get great new content about the power of simulation delivered right to your email on a weekly basis. With content from Ansys experts, partners and customers you will learn about product development advances, thought leadership and trends and tips to better use Ansys tools. Sign up here.
- Suppress Fluent to open with GUI while performing in journal file
- Floating point exception in Fluent
- What are the differences between CFX and Fluent?
- Heat transfer coefficient
- Getting graph and tabular data from result in workbench mechanical
- The solver failed with a non-zero exit code of : 2
- Difference between K-epsilon and K-omega Turbulence Model
- Time Step Size and Courant Number
- Mesh Interfaces in ANSYS FLUENT
- error in cfd post
© 2023 Copyright ANSYS, Inc. All rights reserved.