February 7, 2023 at 6:27 amRob Shropshire
We have a customer that is trying to study hear transfer through a part. They have thermal conductivity values for each structural component and convection co-efficient for air. They have run a simulation but are getting unphysical temperature values so want some guidance on boundary conditions.
I have a part to share but would prefer to email rather than post in here - could you let me know where is best to send this to, in order to get some assistance?
February 7, 2023 at 7:35 amSubashni RavichandranForum Moderator
Hello Rob Shropshire
You can share the model at email@example.com
February 8, 2023 at 1:40 amSubashni RavichandranForum Moderator
Resolved over email
- You must be logged in to reply to this topic.
Boost Ansys Fluent Simulations with AWS
Computational Fluid Dynamics (CFD) helps engineers design products in which the flow of fluid components is a significant challenge. These different use cases often require large complex models to solve on a traditional workstation. Click here to join this event to learn how to leverage Ansys Fluids on the cloud, thanks to Ansys Gateway powered by AWS.
Earth Rescue – An Ansys Online Series
The climate crisis is here. But so is the human ingenuity to fight it. Earth Rescue reveals what visionary companies are doing today to engineer radical new ideas in the fight against climate change. Click here to watch the first episode.
Subscribe to the Ansys Blog to get great new content about the power of simulation delivered right to your email on a weekly basis. With content from Ansys experts, partners and customers you will learn about product development advances, thought leadership and trends and tips to better use Ansys tools. Sign up here.
- How to work with STL file?
- Rotate tool in ANSYS Design Modeler
- section plane
- Using Symmetry in DesignModeler and Expanding the Results
- ANSYS FLUENT – Operation would result in non manifold bodies
- drawing a geometry by importing a table of points
- material properties
- Coordinates orientation
- “contact pair has no element in it.” how to resolve this problem
- Parameters not imported into Workbench 18.2 from Solidworks/Inventor
© 2023 Copyright ANSYS, Inc. All rights reserved.