Tagged: workbench-help
-
-
February 28, 2022 at 9:11 am
Parth_Mehta
SubscriberI keep getting the error that the fluid flow is invalid, and that I should check the individual cells, Any assistance/ recommendation would be greatly appreciated.
March 9, 2022 at 12:06 amSurya Deb
Ansys EmployeeHello,
Can you check if the probe point somehow falls outside the computational domain?
Also, do you see the error without setting a probe as an output parameter?
Check with a single phase setup first to make sure the flow makes sense.
Regards SD
Viewing 1 reply thread- You must be logged in to reply to this topic.
Ansys Innovation SpaceEarth Rescue – An Ansys Online Series
The climate crisis is here. But so is the human ingenuity to fight it. Earth Rescue reveals what visionary companies are doing today to engineer radical new ideas in the fight against climate change. Click here to watch the first episode.
Ansys Blog
Subscribe to the Ansys Blog to get great new content about the power of simulation delivered right to your email on a weekly basis. With content from Ansys experts, partners and customers you will learn about product development advances, thought leadership and trends and tips to better use Ansys tools. Sign up here.
Trending discussions- Suppress Fluent to open with GUI while performing in journal file
- Floating point exception in Fluent
- What are the differences between CFX and Fluent?
- Heat transfer coefficient
- Getting graph and tabular data from result in workbench mechanical
- The solver failed with a non-zero exit code of : 2
- Difference between K-epsilon and K-omega Turbulence Model
- Time Step Size and Courant Number
- Mesh Interfaces in ANSYS FLUENT
- error in cfd post
Top Contributors-
2564
-
2068
-
1289
-
1106
-
459
Top Rated Tags© 2023 Copyright ANSYS, Inc. All rights reserved.
Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.
-