March 26, 2021 at 6:20 pmtuncaySubscriberI want to perform a flow analysis in a filter in ansys fluent air handling unit. How and where do I need to define the porous area. Thank you in advance for your help.n
March 29, 2021 at 1:59 pmKarthik RAdministrator
March 29, 2021 at 3:34 pmRobAnsys EmployeePorous Jump (boundary zone) or Porous Media (cell zone) are the two options. You then assign resistance coefficients over porous area: it's all explained in the Fluent User's Guide along with ways to convert various types of data into the coefficients. n
- You must be logged in to reply to this topic.
Earth Rescue – An Ansys Online Series
The climate crisis is here. But so is the human ingenuity to fight it. Earth Rescue reveals what visionary companies are doing today to engineer radical new ideas in the fight against climate change. Click here to watch the first episode.
Subscribe to the Ansys Blog to get great new content about the power of simulation delivered right to your email on a weekly basis. With content from Ansys experts, partners and customers you will learn about product development advances, thought leadership and trends and tips to better use Ansys tools. Sign up here.
- Suppress Fluent to open with GUI while performing in journal file
- Floating point exception in Fluent
- What are the differences between CFX and Fluent?
- Heat transfer coefficient
- Getting graph and tabular data from result in workbench mechanical
- The solver failed with a non-zero exit code of : 2
- Difference between K-epsilon and K-omega Turbulence Model
- Time Step Size and Courant Number
- Mesh Interfaces in ANSYS FLUENT
- error in cfd post
© 2023 Copyright ANSYS, Inc. All rights reserved.