TAGGED: hfss, hfss-15, incident-far-field, master-slave-boundaries, polarization
May 21, 2022 at 5:44 pmdekozinyo88SubscriberHave a nice day everyone. I am trying to simulate monoscattering analysis of conducting strip (infinite along z-axis.) I am applying master slave boundaries with incident wave excitation but HFSS do not allow me that together. Without master slave boundary structure, there is no problem because of the cross section plane and we are getting solutions correctly but our teacher insist of get solutions with master slave boundary. How should we apply them together ? Thank you everyone
May 25, 2022 at 11:42 amAnchal SinghAnsys Employee
The HFSS version you are using is very old. It is highly recommended to use the latest version of the Ansys HFSS which you can download from the Ansys Customer Portal.
The primary and secondary boundaries (previously it was the master and slave boundary) need to be paired with the 'Floquet port' excitation type and not with the Incident wave' excitation in the HFSS. To learn more about Floquet port you can visit - Ansys HFSS Floquet Port - ANSYS Innovation Courses
Hope this helps.
- You must be logged in to reply to this topic.
Boost Ansys Fluent Simulations with AWS
Computational Fluid Dynamics (CFD) helps engineers design products in which the flow of fluid components is a significant challenge. These different use cases often require large complex models to solve on a traditional workstation. Click here to join this event to learn how to leverage Ansys Fluids on the cloud, thanks to Ansys Gateway powered by AWS.
Earth Rescue – An Ansys Online Series
The climate crisis is here. But so is the human ingenuity to fight it. Earth Rescue reveals what visionary companies are doing today to engineer radical new ideas in the fight against climate change. Click here to watch the first episode.
Subscribe to the Ansys Blog to get great new content about the power of simulation delivered right to your email on a weekly basis. With content from Ansys experts, partners and customers you will learn about product development advances, thought leadership and trends and tips to better use Ansys tools. Sign up here.
- simulation completed with execution error on server
- How to export Ansys Maxwell simulation results for post-processing in matlab or in .csv file
- Maxwell, HFSS or Q3D?
- Unable to assign correctly the excitations in a coil
- Signing up as ANSYS Support Coordinator
- Running ANSYS HFSS on the HPC (it runs on Linux only)
- Intersect errors with model with complex structure
- Running ANSYS HFSS on multiple nodes on SLURM based cluster
- HFSS: reset marker legend dimensions.
© 2023 Copyright ANSYS, Inc. All rights reserved.