HFSS 3D layout中如何创建component？
-
-
HFSS 3D layout跟Siwave类似，很多操作可以基于component来完成，比如设置solderball，添加端口，添加器件模型等，所以有时会需要手动编辑添加component。3D layout中的器件都是基于pad或过孔来创建的。
如下图所示，按住ctrl键，点选需要创建component的Pin，然后点击Draw >> Component >> create。
在弹出的Create Component的窗口中，选择Type，输入器件名称等。点击ok后完成创建，可以在layout中看到Component的器件框，同时在IC列表中也能看到U0这个器件，包含8个pin脚。
-
- 您必须登录才能回复此主题。
Boost Ansys Fluent Simulations with AWS
Computational Fluid Dynamics (CFD) helps engineers design products in which the flow of fluid components is a significant challenge. These different use cases often require large complex models to solve on a traditional workstation. Click here to join this event to learn how to leverage Ansys Fluids on the cloud, thanks to Ansys Gateway powered by AWS.
Earth Rescue – An Ansys Online Series
The climate crisis is here. But so is the human ingenuity to fight it. Earth Rescue reveals what visionary companies are doing today to engineer radical new ideas in the fight against climate change. Click here to watch the first episode.
Ansys Blog
Subscribe to the Ansys Blog to get great new content about the power of simulation delivered right to your email on a weekly basis. With content from Ansys experts, partners and customers you will learn about product development advances, thought leadership and trends and tips to better use Ansys tools. Sign up here.
-
Rob
-
Guilin Sun
-
peteroznewman
-
Ashish Kumar
-
DrAmine
You are navigating away from the AIS Discovery experience