June 16, 2021 at 8:34 amcfdjannisSubscriber
I have a question regarding the XY plot function.
Is it possible to increase the precision of the "Write to File" function? Fluent gives me unfortunately only values in 5 cm steps, I would like to have a higher resolution of the data.
Thanks a lot
JannisJune 16, 2021 at 10:56 amDrAmineAnsys EmployeeScreenshot of Panel?
June 16, 2021 at 12:48 pmJune 16, 2021 at 12:49 pmJune 16, 2021 at 12:51 pmaitor.amatriainSubscriberWhat is your mesh size?
June 16, 2021 at 2:07 pmcfdjannisSubscriber50 mm
June 16, 2021 at 2:13 pmaitor.amatriainSubscriberFluent is giving you all node/cell values, so you want interpolated values. Yo have to do that manually.
June 16, 2021 at 2:53 pmDrAmineAnsys EmployeeSo Fluent is providing what you have. Any other interpolation should be done on your side.
June 16, 2021 at 3:34 pmcfdjannisSubscriberAhh Okay, I see.
Thank you guys!
Viewing 8 reply threads
Ansys Innovation Space
- You must be logged in to reply to this topic.
Simulation World 2022
Check out more than 70 different sessions now available on demand. Get inspired as you hear from visionary companies, leading researchers and educators from around the globe on a variety of topics from life-saving improvements in healthcare, to bold new realities of space travel. Take a leap of certainty and check out a session today here.
Earth Rescue – An Ansys Online Series
The climate crisis is here. But so is the human ingenuity to fight it. Earth Rescue reveals what visionary companies are doing today to engineer radical new ideas in the fight against climate change. Click here to watch the first episode.
Subscribe to the Ansys Blog to get great new content about the power of simulation delivered right to your email on a weekly basis. With content from Ansys experts, partners and customers you will learn about product development advances, thought leadership and trends and tips to better use Ansys tools. Sign up here.Trending discussions
- Suppress Fluent to open with GUI while performing in journal file
- Heat transfer coefficient
- What are the differences between CFX and Fluent?
- Floating point exception in Fluent
- The solver failed with a non-zero exit code of : 2
- Getting graph and tabular data from result in workbench mechanical
- Difference between K-epsilon and K-omega Turbulence Model
- Time Step Size and Courant Number
- Mesh Interfaces in ANSYS FLUENT
- error in cfd post
Top Rated Tags
© 2022 Copyright ANSYS, Inc. All rights reserved.Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.