July 15, 2018 at 7:57 pmlongcwang3Subscriber
Hi, I am now simulating the boiling in vertical annulus using Eulerian multiphase model and RPI boiling model. I set the secondary phase diameter (vapor) diameter to 'boiling-dia', but I can't find how it's calculated from the User guide. Can anyone show the equation to calculated this diameter?
July 16, 2018 at 10:44 am
July 16, 2018 at 1:50 pm
July 16, 2018 at 4:42 pm
July 16, 2018 at 4:53 pmlongcwang3Subscriber
Thanks for your reply, Karthik,
So this bubble diameter is exactly the same as 'boiling-dia'. Does the wall lubrication models use this model as well?
July 16, 2018 at 5:26 pmKarthik RAdministrator
Yes, the wall lubrication models in RPI boiling model (Antal et al., section 184.108.40.206.1) uses these bubble diameter definitions. I'd recommend you go through the theory guide for additional details. Hope this helps.
Good luck with your model.
- You must be logged in to reply to this topic.
Earth Rescue – An Ansys Online Series
The climate crisis is here. But so is the human ingenuity to fight it. Earth Rescue reveals what visionary companies are doing today to engineer radical new ideas in the fight against climate change. Click here to watch the first episode.
Subscribe to the Ansys Blog to get great new content about the power of simulation delivered right to your email on a weekly basis. With content from Ansys experts, partners and customers you will learn about product development advances, thought leadership and trends and tips to better use Ansys tools. Sign up here.
- Suppress Fluent to open with GUI while performing in journal file
- Floating point exception in Fluent
- What are the differences between CFX and Fluent?
- Heat transfer coefficient
- Getting graph and tabular data from result in workbench mechanical
- The solver failed with a non-zero exit code of : 2
- Difference between K-epsilon and K-omega Turbulence Model
- Time Step Size and Courant Number
- Mesh Interfaces in ANSYS FLUENT
- error in cfd post
© 2023 Copyright ANSYS, Inc. All rights reserved.