How to Sweep Mesh Ventilated Brake Disk with Split Faces
-
-
My goal is to have multiple elements along the thickness of the disk to properly simulate bending stress. I've split the face so I can apply a Pressure boundary condition only where the brake pad sweeps the rotor face (highlighted in green). However, this seems to make the body unsweepable and I'm curious if there's a workaround or perhaps a method similar to Sweep that will allow me to have 3 or 4 elements along the disc thickness.
-
-
- You must be logged in to reply to this topic.
Boost Ansys Fluent Simulations with AWS
Computational Fluid Dynamics (CFD) helps engineers design products in which the flow of fluid components is a significant challenge. These different use cases often require large complex models to solve on a traditional workstation. Click here to join this event to learn how to leverage Ansys Fluids on the cloud, thanks to Ansys Gateway powered by AWS.
Earth Rescue – An Ansys Online Series
The climate crisis is here. But so is the human ingenuity to fight it. Earth Rescue reveals what visionary companies are doing today to engineer radical new ideas in the fight against climate change. Click here to watch the first episode.
Ansys Blog
Subscribe to the Ansys Blog to get great new content about the power of simulation delivered right to your email on a weekly basis. With content from Ansys experts, partners and customers you will learn about product development advances, thought leadership and trends and tips to better use Ansys tools. Sign up here.
-
Rob
-
Guilin Sun
-
peteroznewman
-
Ashish Kumar
-
DrAmine
You are navigating away from the AIS Discovery experience