Electronics

Electronics

How to use co-simulation when using Floquet port excitation in Ansys HFSS tool

    • ady09
      Subscriber

      Hello,

      I am designing an antenna array on the Ansys Electronics desktop. For my initial analysis, I am designing a unit cell using 'Floquet port' excitation with primary and secondary boundary conditions in the 'Ansys HFSS' tool. Also, in the model I want to implement a pin diode, for which I have the respective 'On' and 'Off' state .s2p files. To set up these files in the model, I want to use the 'Ansys Circuit' tool, but I have no idea how to set up the floquet port excitation in the circuit tool. Please, help me resolve the issue, and also do let me know if any further information is required. Thank you!

    • Praneeth
      Ansys Employee

      Please let us know how the feed is provided to the antenna array that you are designing.
      I would suggest you to go through "Cosimulation Using Ansys HFSS - ANSYS Innovation Courses" video course of our Ansys Innovation course channel if you are exploring the cosimulation capabilities for the first time.
      All the very best.
Viewing 1 reply thread
  • You must be logged in to reply to this topic.