August 31, 2019 at 8:10 pmUMAIR2102Subscriber
I need to use frensel lens coupled with solar still and compare the results of efficiency of solar still with and without frense lens.Could any one help me thank you.
September 2, 2019 at 3:40 pmRobAnsys Employee
You can either work out the effect of the lens manually or use a solid zone to represent the lens: it's not going to be an easy calculation though.
September 5, 2019 at 12:15 pmUMAIR2102Subscriber
Hi, Rwoolhou. Could you please refer me some document or explain me in detail how it is to be done.
September 6, 2019 at 1:36 pmRobAnsys Employee
Look in the User's Guide for Fluent, Radiation chapter to be specific. I think you'll need DO or possible the Monte-Carlo model (I've not used the latter as it's relatively new).
- You must be logged in to reply to this topic.
Earth Rescue – An Ansys Online Series
The climate crisis is here. But so is the human ingenuity to fight it. Earth Rescue reveals what visionary companies are doing today to engineer radical new ideas in the fight against climate change. Click here to watch the first episode.
Subscribe to the Ansys Blog to get great new content about the power of simulation delivered right to your email on a weekly basis. With content from Ansys experts, partners and customers you will learn about product development advances, thought leadership and trends and tips to better use Ansys tools. Sign up here.
- Suppress Fluent to open with GUI while performing in journal file
- Floating point exception in Fluent
- What are the differences between CFX and Fluent?
- Heat transfer coefficient
- Getting graph and tabular data from result in workbench mechanical
- The solver failed with a non-zero exit code of : 2
- Difference between K-epsilon and K-omega Turbulence Model
- Time Step Size and Courant Number
- Mesh Interfaces in ANSYS FLUENT
- error in cfd post
© 2023 Copyright ANSYS, Inc. All rights reserved.