How to use LS-DYNA simulate Piezoelectric material

- June 10, 2022 at 10:39 am
  
  water5726water5726
  Subscriber
  
  Dear Team
  
  I have seen a PPT that uses *mat_add_pzelectric to get voltage when a piezoelectric material is deformed.
  
  I tried to use the same card but I can't get voltage.
  Do I need to enable specific output settings in the LS-DYNA? or have any example about simulating PZT mat?
  
  Thanks.
- June 10, 2022 at 11:12 am
  
  Erik Kostson
  Ansys Employee
  
  I would suggest ti post this in the Explicit forum:
  https://forum.ansys.com/forums/forum/discuss-simulation/explicit-dynamics/
- June 10, 2022 at 12:04 pm
  
  Erik Kostson
  Ansys Employee
  
  Also there are not many examples around for this type of analysis (pzt) - finally this would be much easier to do in workbench (2022) in a coupled field transient system.

Viewing 2 reply threads

You must be logged in to reply to this topic.

Ansys Innovation Space

Boost Ansys Fluent Simulations with AWS

Computational Fluid Dynamics (CFD) helps engineers design products in which the flow of fluid components is a significant challenge. These different use cases often require large complex models to solve on a traditional workstation. Click here to join this event to learn how to leverage Ansys Fluids on the cloud, thanks to Ansys Gateway powered by AWS.

Earth Rescue – An Ansys Online Series

The climate crisis is here. But so is the human ingenuity to fight it. Earth Rescue reveals what visionary companies are doing today to engineer radical new ideas in the fight against climate change. Click here to watch the first episode.

Ansys Blog

Subscribe to the Ansys Blog to get great new content about the power of simulation delivered right to your email on a weekly basis. With content from Ansys experts, partners and customers you will learn about product development advances, thought leadership and trends and tips to better use Ansys tools. Sign up here.

Trending discussions